About Cardinal Health Heavy Duty Raised Toilet Seat with Lock:
- Non-Sterile.
- Latex-free.
- Weight capacity: 600 pound
- Dimensions: L20.5 X W18.5 X H7.5 Inch
- Weight: 9.4lb
- Easy push button height adjustment in 1IN increments
- Engineer tested, clinician approved, high quality at an affordable price
- Easy to assemble, no tools required, built to last, cleaning instructions are simple and clear, attaches securely and locks to most standard and elongated toilets, adds 4.8 inches to bowl height for easier accessibility
- Wide, contoured seat for added comfort, durable, molded construction cleans easily, lightweight heavy gauge polyethylene offers portability
- Not made with natural rubber latex
- Packaging dimensions: Height 7, Length 21.5, Width 17.5, Weight 5.6LB
To Install:
Note: The raised toilet seat is compatible with a variety of toilet fixtures. Certain bowl styles may require the removal of the existing seat and/or lid to ensure a correct fit.
To Install Raised Toilet Seat without Lock:
- Raise the toilet lid and seat ring, exposing toilet bowl.
- Place raised toilet seat directly onto toilet bowl.
- Ensure that the raised toilet seat is centered and sitting flat on toilet bowl. The seat is installed properly and ready for use when the unit sits flat on the toilet bowl lip and fits securely against the inner rim of the bowl.
To Install Raised Toilet Seat with Lock:
- Raise the toilet lid and seat ring, exposing toilet bowl.
- Turn locking device (located on front of locking raised toilet seat) counterclockwise until there is enough space to clear the inner rim of toilet.
- Place the raised toilet seat onto the toilet bowl rim by hooking rear flanges under the edge of the bowl. Ensure that the raised toilet seat sits flat on the toilet bowl rim, with the adjustment knob at the front of the toilet bowl.
- Center the raised toilet seat on the bowl, then push the unit back as far as possible.
- Tighten the adjustment knob by turning it clockwise. Once resistance is felt, turn knob an additional 1/8 inch until snug.
- If the rear portion of the raised toilet seat is touching the toilet seat or lid, remove the toilet seat and lid and repeat steps 3-5. The raised toilet seat is installed properly and ready for use when the unit sits flat on the toilet bowl lip and fits securely against the inner rim of the bowl.
To Use:
Note: The raised toilet seat may be used in the same manner as a regular seat. Armrests are for assistance only and are not designed to support an individual's total weight. Use grab bars or toilet safety frame with any model not containing arms.
- Back up to the seat until the backs of your legs are touching it.
- Reach back for the armrests or hand holds if they are present.
- Slowly lower yourself onto the raised toilet seat, bending at the hips, elbows, and knees as needed.
- To get up from the seat, push yourself up on the armrests or seat. Make sure you have your balance before releasing your grasp from the raised toilet seat.
Warning:
Do Not Attempt To Adjust Or Use Your Raised Toilet Seat Without Reading All Instructions Carefully. Failure To Follow Instructions May Result In Injury.
Do not exceed the maximum weight capacity or serious injury may result.
Be sure to center your weight on the raised toilet seat, as the seat may tip if you lean too far forward or to either side.
The raised toilet seat with lock is not constructed for permanent installation. The seat should be loosened and retightened once a week to ensure proper fit. Only use hands while rotating the knob, as a wrench or other tool may break the screw assembly.
If proper installation of raised toilet seat with lock cannot be achieved, do not use. Not all toilet bowls are compatible with the raised toilet seat with lock, which will prevent its proper use and may cause damage to the product. If the toilet bowl has a raised top or inner ring, or has protruding points or sections, the raised toilet seat with lock should not be used. Failure to comply with the warning may result in severe injury.
Armrests are for assistance only and are not designed to support an individual's total weight.
Ensure armrests are correctly and securely installed. Do not use armrests if any looseness is noted